ASTM A252-89 Welded and seamless steel pipe piles
| Scope | ASTM A671 TABLE 1 | ASTM A672 TABLE 1 | ASTM A691 TABLE 1 |
This standard is issued under the fixed designation A 252; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ュ) indicates an editorial change since the last revision or reapproval.
This specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for specific year of issue which has been adopted by the Department of Defense.
1. Scope:
- 1.1 This specification covers nominal (average)wall steel pipe piles of cylindrical shape and applies to pipe in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in place concrete piles.
- 1.2 The values stated in inch-pound units are to be regarded as the standard.
- 1.3 The following precautionary caveat pertains only to the test method portion, Section 16 of this specification. This standard does not purport to address all of the safery problems, if any, associated with its use. It is the responsi-bility of the user of this standard to establish applicability of regulatory limitations prior to use.
- JIS Number and Corrensponding Foreign Standards
Harbour oil
Bridge
| API 5L | B X42. X46. X52. X60 .X65. X70. X80. X100 | Line Pipe (PSL1. PSL2) |
| API 2B | Fabrication of Structure Steel Pipe | |
| ASTM A134 | Pipe, Steel, Electric-Fusion(Arc)-Welded (Size NPS 16 and over) | |
| ASTM A139 | A, B | Electric-Fusion(Arc)-Welded Steel Pipe (Size NPS 4 and over) |
| ASTM A252 | 1, 2, 3 | Welded and Seamless Steel Pipe Piles |
| ASTM A671 | All | Electric-Fusion-Welded Steel Pipe for Atmospheric & Low Temperature |
| ASTM A672 | All | Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperature |
| ASTM A691 | Carbon and Alloy Steel Pipe, Electric-Fusion Welded for High Pressure Service at High Temperatures |
|
| JIS G 3444 | STK 290,400,490,500,540 |
Carbon Steel Tubes for General Structural Purpose |
| JIS G 3457 | STPY 400 | Arc Welded Carbon Steel Pipe |
| KS D 3583 | SPW 400 | Arc Welded Carbon Steel Pipe |
| KS D 3566 | STK 290,400,490,500,540 |
Carbon Steel Tubes for General Structural Purpose |
ASTM A671 TABLE 1 Plate Specifications
| Pipe Grade | Type of Steel | ASTM Specification | |
| No. | Grade | ||
| CA 55 | plain carbon | A 285/A 285M | C |
| CB 60 | plain carbon, killed | A 515/A 515M | 60 |
| CB 65 | plain carbon, killed | A 515/A 515M | 65 |
| CB 70 | plain carbon, killed | A 515/A 515M | 70 |
| CC 60 | plain carbon, killed, fine grain | A 516/A 516M | 60 |
| CC 65 | plain carbon, killed, fine grain | A 516/A 516M | 65 |
| CC 70 | plain carbon, killed, fine grain | A 516/A 516M | 70 |
| CD 70 | manganese-silicon, normalized | A 537/A 537M | 1 |
| CD 80 | manganese-silicon, quenched and tempered | A 537/A 537M | 2 |
| CE 55 | plain carbon | A 442/A 442M | 55 |
| CE 60 | plain carbon | A 442/A 442M | 60 |
| CF 65 | nickel steel | A 203/A 203M | A |
| CF 70 | nickel steel | A 203/A 203M | B |
| CF 66 | nickel steel | A 203/A 203M | D |
| CF 71 | nickel steel | A 203/A 203M | E |
| CJ 101 | alloy steel, quenched and tempered | A 517/A 517M | A |
| CJ 102 | alloy steel, quenched and tempered | A 517/A 517M | B |
| CJ 103 | alloy steel, quenched and tempered | A 517/A 517M | C |
| CJ 104 | alloy steel, quenched and tempered | A 517/A 517M | D |
| CJ 105 | alloy steel, quenched and tempered | A 517/A 517M | E |
| CJ 106 | alloy steel, quenched and tempered | A 517/A 517M | F |
| CJ 107 | alloy steel, quenched and tempered | A 517/A 517M | G |
| CJ 108 | alloy steel, quenched and tempered | A 517/A 517M | H |
| CJ 109 | alloy steel, quenched and tempered | A 517/A 517M | J |
| CJ 110 | alloy steel, quenched and tempered | A 517/A 517M | K |
| CJ 111 | alloy steel, quenched and tempered | A 517/A 517M | L |
| CJ 112 | alloy steel, quenched and tempered | A 517/A 517M | M |
| CJ 113 | alloy steel, quenched and tempered | A 517/A 517M | P |
| CK 75 | carbon-manganese-silicon | A 299/A 299M | |
| CP 65 | alloy steel, age hardening, nomalized and precipitation heat treated | A 736/A 736M | 2 |
| CP 75 | alloy steel, age hardening, nomalized and precipitation heat treated | A 736/A 736M | 3 |
ASTM A672 TABLE 1 Plate Specifications
| Pipe Grade | Type of Steel | ASTM Specification | |
| No. | Grade | ||
| A45 | plain carbon | A 285 | A |
| A50 | plain carbon | A 285 | B |
| A65 | plain carbon | A 285 | C |
| B55 | plain carbon, killed | A 515 | 55 |
| B60 | plain carbon, killed | A 515 | 60 |
| B65 | plain carbon, killed | A 515 | 65 |
| B70 | plain carbon, killed | A 515 | 70 |
| C55 | plain carbon, killed, fine grain | A 516 | 55 |
| C60 | plain carbon, killed, fine grain | A 516 | 60 |
| C65 | plain carbon, killed, fine grain | A 516 | 65 |
| C70 | plain carbon, killed, fine grain | A 516 | 70 |
| D70 | manganese-silicon-nomalized | A 537 | 1 |
| D80 | manganese-silicon-Q&T A | A 537 | 2 |
| E55 | plain carbon | A 442 | 55 |
| E60 | plain carbon | A 442 | 60 |
| H75 | manganese-molybdenum-nomalized | A 302 | A |
| H80 | manganese-molybdenum-nomalized | A 302 | B, C or D |
| J80 | manganese-molybdenum-Q&T A | A 533 | CI-1 B |
| J90 | manganese-molybdenum-Q&T A | A 533 | CI-2 B |
| J100 | manganese-molybdenum-Q&T A | A 533 | CI-3 B |
| K75 | chromium-manganese-silicon | A202 | A |
| K857 | chromium-manganese-silicon | A202 | B |
| L65 | molybdenum | A204 | A |
| L70 | molybdenum | A204 | B |
| L75 | molybdenum | A204 | C |
| N75 | manganese-silicon | A 299 | ... |
ASTM A691 TABLE 1 Plate Specifications
| Pipe Grade | Type of Steel | ASTM Specification | HB, max A | |
| Number | Grade | |||
| CM-65 | carbon-molybdenum steel | A 204/A 204M | A | 201 |
| CM-70 | carbon-molybdenum steel | A 204/A 204M | B | 201 |
| CM-75 | carbon-molybdenum steel | A 204/A 204M | C | 201 |
| CMSH-70 | carbon-manganese-silicon steel, normalized | A 537/A 537M | 1 | |
| CMS-75 | carbon-manganese-silicon steel | A 299/A 299M | ... | ... |
| CMSH-80 | carbon-manganese-silicon steel, quenched and tempered | A 537/A 537M | 2 | |
| 1/2 CR | 1/2% chromium, 1/2% molybdenum steel | A 387/A387M | 2 | 201 |
| 1CR | 1% chromium, 1/2% molybdenum steel | A 387/A387M | 12 | 201 |
| 1 1/4 CR | 1 1/4% chromium, 1/2% molybdenum steel | A 387/A387M | 11 | 201 |
| 2 1/4CR | 2 1/4% chromium, 1% molybdenum steel | A 387/A387M | 22 | 201 |
| 3CR | 3% chromium, 1% molybdenum steel | A 387/A387M | 2f | 201 |
| 5CR | 5% chromium, 1/2% molybdenum steel | A 387/A387M | 5 | 225 |
| 9CR | 9% chromium, 1% molybdenum steel | A 387/A387M | 9 | 241 |