Pipe Flanges Raw Material Specifications, Flanges Manufacturing Process

Pipe Flanges Raw Material Specifications

Requirements are valid for normal situation, in special you have to contact us to introduce.

Material	Test basis / Requirements	Delivery Condition
C 22.8 (1.0460)	DIN 17243: 01.87 + VdTUEV - WB 350/3: 2009 DIN 17243: 01.87 VdT"UV - WB 350/3: 2009	+N
P250GH (1.0460)	DIN EN 10222-2: 04.2000 National Annex	+N
P245GH (1.0352)	EN 10222-2:1999-12 + AC : 2000-02	+N
A105N / C21	ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 + VdTUEV399/3: 1996-09 + NACE MR 0175: 2000	+N
A105N	ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 + NACE MR 0175: 2000	+N
C21 (1.0432)	VdTUEV - WB 399/3: 1996-09	+N
RSt 37-2 (1.0038)	DIN 17100: 1980-01	+N
S235JR (1.0038)	DIN EN10025-2: 2005-04	+N
16Mo3 (1.5415)	DIN EN10222-2:1999-12 + AC:2000-02	+N
WStE355 / TStE355 (1.0565 / 1.0566)	DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06	+N or QT
P355NH (1.0565)	DIN EN10222-4: 1998 + A1: 2002-12	+N
WStE355 / P355NH (1.0565)	DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06 + DIN EN10222-4: 1998 + A1: 2002-12 + DIN EN17103 :1989-10 + DIN EN10222-4: 1998 + A1: 2002-12	+N or QT
1.4301 (X5CrNi17-10)	DIN EN10222-5: 2000-02	+AT
1.4306 (X2CrNi19-11)	DIN 17440:1996-09	+AT
1.4401 (X5CrNiMo17-12-2)	DIN EN10222-5: 2000-02	+AT
1.4404 (X2CrNiMo17-12-2)	DIN EN10222-5: 2000-02	+AT
1.4432 (X2CrNiMo17-12-3)	DIN EN10222-5: 2000-02	+AT
1.4541 (X6CrNiTi18-10)	DIN EN10222-5: 2000-02	+AT
1.4571 (X6CrNiMoTi17-12-2)	DIN EN10222-5: 2000-02	+AT
1.4541 / F321	DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005	+AT
1.4571 / F316Ti	DIN EN10222-5: 2000-02 / +ASTM A 240	+AT
1.4404 / F316L	DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005	+AT
1.4306 / F304L	DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005	+AT
1.4307 / F304L	DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005	+AT
Flange	Test basis / Requirements
DIN, Carbon Steel	DIN2519:1991-06 + AD2000-W9: 02.04; -W13/ TRD107;TRB100; + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
DIN, corrosion-resistant Steel	DIN2519:1991-06 + AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100; + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
DIN EN 1092-1, Carbon Steel	DIN EN 1092-1: 2008-09 + AD2000-W9; -W13/TRD107;TRB100 + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
DIN EN 1092-1, Stainless Steel	DIN EN 1092-1: 2008-09 + AD2000-W9; -W2; -W10/ TRD107; TRB100 + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
ANSI	ASME B16.5:2003 ASME B16.47:2006

Basic requirements for Material and Fitting

Requirements are valid for normal case, in special case you have to contact the technical department.

Material	Test basis / Requirements	Delivery Condition
1.4541 (X6CrNiTi18-10)	DIN 17458:1996-09	+AT
1.4571 (X6CrNiMoTi17-12-2)	DIN 17458:1996-09	+AT
Fittings	Test basis / Requirements
DIN2609 Stainless Steel	VdTUEV –MB 1252/ AD2000- W2; W10/TRD107;TRB100
T-Piece	Directive 97/23/EG Annex I, Chap. 4.3:1998-02
Bow	DIN2615-1
Reducer	DIN2605-1 DIN2616-1

A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.