Flange pressure rating
TPCO
There are two types of flange standards used in petroleum and chemical industry. One is the pressure vessel flange standard, and the other is the pipe flange standard.
Li Gong said: Common flanges used in different places, so the pressure level is a certain degree of certain differences, such as large stainless steel flange is mainly used in chemical engineering high temperature pipeline, so its material pressure performance There are high demands. Therefore, customers often require forged flanges because the material is forged to increase the density of the structure, and it also enhances its pressure bearing capacity. In the domestic and international standards, there are definite grade requirements for the compression of large stainless steel flanges. Large stainless steel flanges are generally divided into: PN25, PN6, PN10, PN16, PN25, PN40 and so on. The most commonly used ones are PN10 and PN16.
For example, the design pressure of the internal pressure vessel flange with a safety valve should be determined according to the opening pressure of the safety valve. The design pressure is equal to or slightly greater than the opening pressure of the safety valve, and the opening pressure of the safety valve is taken to be 1.05 to 1.1 times the working pressure. It is known that the working pressure is 0.8 MPa, then the opening pressure of the safety valve can be taken as 0.88 MPa, so the design pressure can be taken as 0.9 MPa. In this way, it is reasonable to select the allowable working pressure of the container flange 1C4 material at 50 degrees Celsius to be 0.9 MPa (flange of 1.0 MPa class). Nine Swiss flange factory for you to solve any problem with the flange.
Flat welding and butt welding flanges have two types of rings with and without rings. When the equipment is made of stainless steel, carbon steel flange 7 and stainless steel lining rings are used to save the stainless steel.
When using the flange standard to determine the flange size, you must know the nominal diameter and nominal pressure of the flange. The nominal diameter of the pressure vessel flange and the nominal diameter of the pressure vessel take the same series of values. For example, DN 1000mm pressure vessels should be equipped with DN 1000mm pressure vessel flanges.
The nominal pressure of the flange is determined in relation to the flange's maximum operating pressure, operating temperature, and flange material. Since the flange size series and the flange thickness were calculated, the 16MnR mechanical performance at 200°C was used as a benchmark. It is therefore specified that the flange size determined by this reference, at 200°C, its maximum allowable operating pressure is considered to be the nominal pressure of the flange of that size. For example, a flange with a nominal pressure PNO.6 MPa refers to a flange having a specific size that is made of 16 MnR. Its maximum allowable operating pressure is 0.6 MPa at 200°C. If the PN 0.6MPa flange is used above 200°C, its maximum operating pressure will be lower than its nominal pressure of 0.6MPa. Conversely, if it is used under 200°C, the maximum working pressure is still determined at 200°C. If the material of the flange is changed to Q235-A, the mechanical properties of Q235-A steel are worse than that of 16MnR. This flange with a nominal pressure of PN 0.6MPa, even if it operates at 200°C, its maximum allowable operating pressure will also be Below its nominal pressure. Conversely, if the material of the flange is changed from 16MnR to 15MnVR, then, since the mechanical performance of 15MnVR is better than that of 16MnR, the flange of this nominal pressure PN 0.6MPa, when operated at 200°C, its maximum allowable operating pressure will be higher than Its nominal pressure. In short, as long as the nominal diameter and nominal pressure of the flange are determined, the size of the flange will be determined. As far as the maximum operating pressure allowed for this flange is concerned, it is necessary to look at the operating temperature of the blue and the materials used to make it.
